MU-8000V

Highly rigid trunnion table supports high-accuracy 5-axis machining

High quality machined surfaces with the high following of 5-axis machining
●Highly-rigid trunnion table supports both ends
●With ball-screw cooling (Std), reduced following error is achieved while maintaining highly accurate machining.
The indexing accuracies that take 5-axis machining to higher accuracies (MU-5000V Actual data)
●Indexing accuracy
・A-axis indexing accuracy/Indexing return accuracy: ±0.68 sec/±0.40 sec
・C-axis indexing accuracy/Indexing return accuracy: ±0.78 sec/±0.14 sec
●Fast operation
・A-axis/C-axis 90°clamp/unclamp indexing time: 1.0 sec/1.2 sec

A 5-axis machine that really cuts

Beyond the limits of conventional 5-axis machining
Highly efficient machining with amazing machining capacity
MU-5000V, MU-6300V Actual data ([ ]: MU-6300V specs)

Face milling capacity: 504cm3/min (S45C)
●ø80 face mill 8 blade (coating)
Spindle speed: 895min-1
Cutting speed: 225m/min
Feedrate: 2,250mm/min
Cut width × infeed: 56 × 4mm

End milling capacity: 672cm3/min (S45C)
●ø20 roughing end mill 7 blade (carbide)
Spindle speed: 4,000min-1
Cutting speed: 251m/min
Feedrate: 4,800mm/min [2,800mm/min] 
Cut width × infeed: 7 × 20mm [12 × 20mm]

Process-intensive machining with turning capacity that approaches that of a lathe

Turning capacity: 3mm2 (S45C)
Machining dia: ø164mm [ø250mm] 
Cutting speed: 130m/min (table rotation: 252min-1)
Feedrate: 0.6mm/rev
Infeed: 5mm
※ The above are actual examples. Your results may vary due to differences in specifications, tooling and cutting conditions.

Get a real sense of the good visibility and 
operability required in 5-axis machining

Large machining range; tools can be changed with
trunnion still in swing position

The tool reaches the end of the workpiece even with the table at various inclination angles, enabling wide-range 5-axis machining.Tools can be changed with the trunnion still in a swing position, leading to reduced cycle times and higher machining accuracies.

Highlighted Specs

ItemUnitMU-5000VMU-6300VMU-8000V
Table sizemm(in)ø500 (ø19.69)ø630 (ø24.80)ø800 × 630 width (ø31.50 × 24.80)
Spindle speedmin-110,000, 6,00010,000, 6,00010,000, 6,000
Tool storagetools323232
MotorkW(hp)11/7.5 (10 min/cont) (15/10)11/7.5 (10 min/cont) (15/10)11/7.5 (10 min/cont) (15/10)
Machine size (W × D × H)mm(in)3,995 × 2,750 × 3,435 
(157.28 × 108.27 × 135.24)
4,850 × 2,990 × 3,525 
(190.94 × 117.72 × 138.78)
5,280 × 2,990 × 3,625 
(207.87 × 117.72 × 142.72)
Spec extensionLLL
Scroll to Top