The best monozukuri* practices balance high-accuracy machining and workability

Plain type

Angle type

Explore Our Facilities

CNC Cylindrical Grinders

Smaller machine space achieved with use of wheelhead traverse structure :

A wheelhead traverse structure requires a stronger foundation than a table traverse structure. Okuma’s high-rigidity technology meets the conditions needed for a wheelhead traverse structure to achieve a compact body.

CNC Cylindrical Grinders

Superior user-friendly design supports automation :

The upper portion of the front door can accommodate various loader positions. Line flexibility from the space-saving design also contributes to greater automation.

CNC Cylindrical Grinders

Hydrodynamic bearing provides for heavy-duty and highly accurate grinding—with shorter cycle times :

Non-round plain bearing wheel spindle with a dynamic pressure structure supports the wheel spindle with wedge-shaped oil film pressure that is generated by wheel spindle rotation. Retention strength is a powerful 1 t, in addition to which wheel rotation accuracy is kept to within 0.01 µm for a good balance of high accuracy grinding even in heavy-duty cutting. Also, because the wheel spindle has no metal contact, its original performance is maintained semi-permanently.

CNC Cylindrical Grinders

High machining efficiency maintained 
with wide V—Flat guideway:

A widened V—Flat guideway system is used that expands the span between the V and Flat guideways beneath the saddle. Higher workpiece support rigidity enables grinding with full power of 7.5 kW (optional 15 kW). The grinding load on the wheelhead during heavy-duty grinding is supported by wide V—Flat guideway for high machining efficiency.

Highlighted Specs

ItemUnitGP14/15W
GA14/15W
GP25/26W
GA25/26W
Swing over tableømm (øin)330 (12.99)330 (12.99)
Distance between centersmm (in)250 (9.84)400, 650 (15.75, 25.59)
Wheel size (OD × width)mm (in)ø405 × 75 / ø510 × 75
(ø15.94 × 2.95 / ø20.08 × 2.95)
ø510 × 75 / ø610 × 75
(ø20.08 × 2.95 / ø24.02 × 2.95)
Wheel peripheral speedm/sec4545
Wheel motorkW (hp)5.5 (7.5)7.5 (10)
Machine size (W × D × H)mm (in)1,550 × 2,734 × 2,150
(61.02 × 107.64 × 84.65)
2,030, 2,510 × 2,932 × 2,218
(79.92, 98.82 × 115.43 × 87.32)
Scroll to Top